Tag: Vlog

Workshop Heating and Cooling

My shop:
-20’6” x 20’6” with a 10’ ceiling.
All perimeter walls, except 12’ of one wall attached to my house, are not insulated.
-Garage door is a regular 2 car garage door that I added insulation to. Two kits needed for my door.
-Garage door has wide weatherstripping attached to the outside.
-Ceiling above is not insulated.

My local climate:
-I live in central Mississippi which is known to have a high annual precipitation level.
-Mississippi also has a high average temperature.

Previous heating:
-Two 1500w electric radiant heaters. They couldn’t keep up with the space.
-Two electric radiant heaters + a small propane Mr. Heater one plaque 4,000-9,000-BTU Indoor-Safe Portable Radiant Heater. This worked but didn’t burn as efficient as I had hoped and produced an odor that we could smell inside the house.

Previous cooling:
-Box fan. Even a steady breeze is still miserable in the high heat and humidity of the Southeast climate.

Current setup:
-QuietSide brand mini split AC & heat pump unit. Model number QS18-VJ220.
-18,000 BTU cooling and 19,800 BTU heating.
-Comfortably cools to low 70’s in the summer time and drastically reduces the humidity in the shop.
-Comfortably heats the shop in the winter time. Although, the lowest setting is 61 degrees which is a little warm for working in the winter time. I’d prefer to work in a long sleeved shirt or light jacket in the winter and remove the long sleeves in the event that I get hot.
-The outside unit is a lot quieter than the unit for my house.

These videos are short project and everyday updates. If you would like to see actual woodworking videos check out my main channel.
Main Channel:
My website:

Tools in my shop (affiliate links):
Bandsaw –
Bevel gauge (t-bevel) –
Bluetooth adapter –
Dado blade –
Dewalt planer –
Dewalt sander –
Dewalt countersink –
Dovetail gauge –
Eclipse quick release vise –
Engineer square –
Festool Domino –
Forstner bit –
Glu-Bot glue bottle –
Gyokucho 372 japanese pull saw –
Irwin Marples 10" blade –
Kreg K4 –
Kreg DB210 pocket hole machine –
Kreg Mini –
Marble router bit or drill bit –
Marbles –
Megapro NAS Driver –
Milwaukee plunge router –
Mp3 earmuffs –
Narex marking knife –
Ridgid miter saw –
Rustic pine Briwax –
Ryobi 18v brad nailer –
SawStop titanium series blade –
Scraper BAHCO –
12" speed square –
T-bevel (bevel gauge) –
Table top hold down clips –
Tudor brown briwax –
Wax brush wheel for drill –
Wood glue –
Woodriver #4-1/2 –
Woodriver #62 –

DIY HQ Videos for Woodworkers © 2017 Frontier Theme