Tag: DeWalt Table Saw

Garage Workshop Build Out – The Tools You Will Need

One of my viewers, Jack Tyler, asked: "If you were starting from scratch with an empty garage… and work benches, storage racks and other house projects in front of you – which would you buy first? Table Saw or Miter Saw?" Also, one of my neighbors, Doc, ask me some similar questions about setting up his garage workshop. So, I am going to respond to both Jack and Doc by showing you all the tools you will need to build your garage workshop from scratch.

** Ridgid R4516 10 in. Portable Jobsite Table Saw

** Ryobi RTS21G 10 in. Portable Table Saw with Quick Stand Green

Pre Build Out:
Safety Equipment – Eye & Ear Protection, Gloves
Folding Table – 72" and/or Wormate 425
Table Saw – 10" 15 amp
Extension Cord – 12 guage, 25 feet
Extension Cord Reel
Corded Drill or Cordless with extra batteries
Drill Bits – Full Set with counter sink
Driver Bits – Full Set
Tool Set – 130 pieces plus case
Good Tape Measure – 25 ft.
Claw Hammer – 16 oz.
Level
Rafter Square – 12 inch
Straight Edge
Clamps – at least 2 if not 4
Sander
Dust Pan and Brush

Post Build Out:
Miter Saw
Drill Press
Parts Storage & spare parts
Large Wrenches
Counter Sink Punches & Al
Bench Vise
Files
Tweezers
More Clamps
Hack Saw
Cordless Driver
Multi-Outlet Extension – 4 to 6 outlets
Small Screw Drivers

Links

Ridgid Table Saw Review:
//www.youtube.com/watch?v=-TQSXy127nA
Getting the most out of your Workmate 425:

Harbor Freight 130 Piece Tool Set Review:

Shop Clamp Comparison by CP Builds:

Harbor Freight Screw Driver Set:

How to get the most out of your power tools series:
Harbor Freight Table Saw:
Harbor Freight Miter Saw:
Harbor Freight Drill Press:

Video Gear & Editing Software I use for my Videos:

** Camera – Canon VIXIA HF R80

(I actually use an older model which Canon no longer produces)

** Microphone
External Lavalier Microphone with 20' audio cable + Accessory Bundle for Canon VIXIA

** Lighting
Linco Lincostore Photography Equipment Photo Studio Lighting

** Tripod
I3ePro Professional 72-inch Tripod 3-way Panhead Tilt Motion with Built In Bubble Leveling

** Editing Software
Corel VideoStudio Ultimate X10

DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

DIY HQ Videos for Woodworkers © 2017 Frontier Theme